Bailey Cranes & Aerial Lifts | Custom Lifting Solutions ...
Explosion Proof Boom Lifts

EX Explosion Proof Boom Models

EX Articulating Booms:

Model

Working Height

Lift Capacity

Specifications

AE30JEX
36 ft [10.97 m]
500 lbs [227 kg]
AE45JEX
51 ft [15.5 m]
500 lbs [227 kg]
A45JEX
51 ft [15.5 m]
500 lbs [227 kg]
A60JEX
66 ft [20.11 m]
500 lbs [277 kg]
A80JEX
86 ft [26.21 m]
500 lbs [227 kg]

EX Telescopic Booms:

Model

Working Height

Lift Capacity

Specifications

T40EX
45 ft [13.72 m]
1,000 lbs [454 kg]
T46JEX
52 ft [15.85 m]
500 lbs [227 kg]
T60EX
66 ft [60.12 m]
1,000 lbs [454 kg]
T66JEX
71 ft [21.64 m]
750 lbs [340 kg]
T80EX
86 ft [26.21 m]
1,000 lbs [454 kg]

EX Articulating Booms:

Model
Working Height
Lift Capacity
Specifications
AE30JEX
36 ft [10.97 m]
500 lbs [227 kg]
AE45JEX
51 ft [15.5 m]
500 lbs [227 kg]
A45JEX
51 ft [15.5 m]
500 lbs [227 kg]
A60JEX
66 ft [20.11 m]
500 lbs [277 kg]
A80JEX
86 ft [26.21 m]
500 lbs [227 kg]

EX Telescopic Booms:

Model
Working Height
Lift Capacity
Specifications
T40EX
45 ft [13.72 m]
1,000 lbs [454 kg]
T46JEX
52 ft [15.85 m]
500 lbs [227 kg]
T60EX
66 ft [60.12 m]
1,000 lbs [454 kg]
T66JEX
71 ft [21.64 m]
750 lbs [340 kg]
T80EX
86 ft [26.21 m]
1,000 lbs [454 kg]

New EX Boom Lift Technology

The competition still uses hydraulic joysticks requiring many hoses to route through cable tracks to the platform. Hydraulic joysticks have been replaced by electric over 20 years ago due to the maintenance and leakage nightmare. The competition has 27 hoses and 38 fittings at the platform. A high pressure hydraulic leak or blown hose could ruin a paint job!

Platform Battery Condition Indicator

Competitors Design: Battery Condition Indicator located at ground only away from operator. What would happen if machine stopped in the middle of a painting operation?
NFPA/NEC 70 Electrical Requirement changes. Our latest certifications include the new requirements of special metal shielded cabling. 
Competitors Design: Still using SOOW rubber shielded cables which is “Non-Approved” by the latest changes. If an incident occurs, everyone is liable for noncompliance.
Factory Mutual Certification now requires Anti-spark wheel covers. Our products include these new requirements.
Competitors Design: Does not provide and is not compliant with latest FM requirements.
Enhanced Motor Management System Provides improved control of motor operation. Motor contactors are controlled with a more stable signal resulting in improved life and better machine operation.
Competitors Design: Contactors powered by 24V battery pull-off resulting in uneven battery charge condition and contactor flutter at low battery conditions.

Water Penetration Prevention Test

Industry-Leading Compliance!

Our boom lifts meet the latest NFPA/NEC 70 and Factory Mutual requirements, featuring advanced electric controls and certified anti-spark protection.