CH 10 OMNI
An all-electric compact handler rated 10,000 lb on the hook. All four wheels steer.
- 10,000lbHook capacity4,536 kg
- 32ftMax hook height, vertical9.75 m
- 19 ft 1inHook horizontal reach5.82 m
- 10,550lbMachine weight4,785 kg
Attachments pin into the boom tip. Auto-detect identifies the installed attachment and sets the load parameters.
| Attachment | Rated capacity | Notes | View on the stage |
|---|---|---|---|
| Hook | 10,000 lb | Rated close in. 1,150 lb at full horizontal reach. | |
| Forks | 2,500 lb | Forks on the powered boom tip. Auto level keeps them flat. | |
| Glass lifter | 1,100 lb | 3 axes: RAISE / LOWER 90° each way, WRIST 90° each way, SPIN 180°. Free-rotate valves let you position the glass by hand. | |
| Panel lifter | 1,200 lb | Eight vacuum pads for insulated metal panels. Wrist 180° (90° each way). Panel spin 180° standard, 350° available. | |
| Jib | Extends the hook out past the boom tip. Load chart available upon request. | ||
| Man basket | 500 lb | Rated 500 lb across the whole working range. | |
| Winch | 5,000 lb | Single-part line. Raise and lower from the radio remote. A two-part-line winch is also available, up to 10,000 lb close in. | |
| Pipe handler | 1,000 lb | Grips 2 to 12 in pipe, light poles, mullions and beams. |
Lift
- Hook capacityClose in
- 10,000 lb 4,536 kg
- Hook capacity at full horizontal reach
- 1,150 lb 522 kg
- Max hook height, vertical
- 32 ft 9.75 m
- Hook horizontal reachPull-out extended
- 19 ft 1 in 5.82 m
- Hook horizontal reachPull-out retracted
- 12 ft 10 in 3.91 m
- Boom
- 3 sections: 1 fixed, 2 telescoping.
- Boom angle
- −16° to 70° from horizontal
Drive
- Power
- 72 V electric motor
- Drive
- 2 wheels, hydraulic motor
- Drive speed
- 1.2 mph 1.9 km/h
- Steering
- All 4 wheels, up to 90° each way
- Steering modes
- Spin, crab (sideways or diagonal), 2-wheel front or rear, 4-wheel. Spins in place, walks sideways or drives on a diagonal without turning the machine.
- Brakes
- 2, spring-applied, hydraulically released
Machine
- Machine weightWith pull-out hook
- 10,550 lb 4,785 kg
- Attachments
- 8, auto-detected
Rated load limiter
Shows boom angle, horizontal reach, current load and maximum capacity.
Overload cut-out
Over capacity, an alarm sounds and boom raise, boom extend and winch raise stop.
Attachment auto-detect
Sets the load parameters for the installed attachment.
Auto level
Switch on the remote. Keeps single-axis attachments level as the boom moves.
Radio remote
2.4 GHz. 4-line display: steer angle, horizontal reach, load and capacity.
Chassis control station
Key switch, system display, E-stop and tip light.
Tell us the job, the load and the site. We will recommend an attachment and send a quote.
Bailey Cranes is a Service-Disabled Veteran-Owned engineering and manufacturing firm based in Muskego, Wisconsin. We specialize in precision access solutions for industries where the margin for error is zero.
Muskego, WI 53150














